Fire Smoke Detector Series 65 OPTICAL 9-33V DC 2 wire ALEQ0465

smoke,detector no,base

$58.71 Including 15.5% VAT

The Apollo Series 65 Optical Smoke Detector (55000-317) uses advanced photo-electric light scatter technology to detect smoke particles entering its sensing chamber. This conventional detector features an infrared LED that pulses every three seconds, with light scattered by smoke particles detected by a silicon PIN photo-diode positioned at an obtuse angle within the chamber.

Designed for professional fire detection systems, this detector excels at identifying slow-burning, smouldering fires, making it particularly well-suited for installation in bedrooms and escape routes. The white flame-retardant polycarbonate housing includes a clear indicator LED that produces a red light in alarm conditions, with wind-resistant smoke inlets and an insect-resistant gauze cover protecting the optical chamber.

Operating on a two-wire polarity insensitive supply between 9V and 33V DC, the detector is compatible with most conventional fire alarm panels and maintains reliable performance across a wide temperature range from -20°C to +60°C, remaining unaffected by wind speed or atmospheric pressure variations.

Category: Tags: , , , , , , , , , , Brand:

Description

The Series 65 Optical Smoke Detector incorporates a pulsing LED located within the housing of the detector. The external detector moulding is identical to that of the ionisation detector, and has an indicator LED which is clear in quiescent state but produces a red light in alarm.

Operation

The Series 65 Optical Smoke Detector has a moulded self-extinguishing white polycarbonate case with wind resistant smoke inlets. Nickel-plated stainless-steel wiper contacts connect the detector to the base. Inside the case a printed circuit board has the optical system mounted on one side and the signal processing electronics on the other. The sensing chamber is a black moulding configured as a labyrinth which prevents penetration of ambient light. The labyrinth has a fine gauze insect-resistant cover. The chamber houses an infrared light emitting diode (LED) and a photo-diode which has an integral visible-light filter Buy the Apollo Series 65 Optical Smoke Detector (9-33V DC) designed for reliable fire detection in conventional fire alarm systems. Photoelectric sensing technology with 2-wire connection, ideal for homes, offices, and commercial fire safety installations.as extra protection against ambient light. Every three seconds the LED emits a burst of collimated light, modulated at 4kHz. In clear air, light from the LED does not fall directly on the diode because the LED is positioned at an obtuse angle to the diode. When smoke enters the chamber, a fraction of the collimated light is scattered onto the photo-diode. If the resulting signal from the photo-diode is above a pre-set threshold, the LED emits two more bursts of light, this time at two-second intervals. If light is scattered onto the photo-diode by both these pulses – due to the presence of smoke – the detector signals an alarm state by switching the alarm latch on, increasing the current drawn from the supply from about 40?A to a maximum of 75mA. This fall in the impedance of the detector is recognised by the control panel as an alarm signal. The alarm current also illuminates the detector integral LED. A remote indicator connected between the L1 IN terminal and the –R terminal will have a voltage equal to the supply voltage less 1 volt across it and so will illuminate. To ensure correct operation of the detector the control panel must be arranged to supply a maximum of 33 Volts dc and a minimum of 9 Volts dc in normal operation. The supply may fall to 6 Volts dc in alarm conditions if a supply current of at least 10mA is available at this voltage. To ensure effective illumination of the integral LED and any remote indicator, the supply to the detector should exceed 12 Volts. To restore the detector to quiescent condition, it is necessary to expel any smoke and interrupt the electrical supply to the detector for a minimum of one second.

Key Features

  • Responds well to slow-burning, smouldering fires
  • Well-suited to bedrooms and escape routes
  • Unaffected by wind or atmospheric pressure
  • Flashing LED and magnet operated test switch option

Related products